Classic Pearl Necklace Beading Tutorials,Classes, Projects,Patterms and Jewelry making supplies
By: Mandy
Project Type:  Bead Stringing    

Click picture for a close-up of details or steps.

This outstanding necklace was in

This outstanding necklace was inspired by a necklace that we saw on the neck of Natalie Cole in Oprah Magazine .  A classic pearl design with an elegant feel. It wears equally well with a low cut gown or a high collar blouse. Very inexpensive to create and a welcome addition to anyone's jewelry collection. The pearls are 5 mm gold cultured round. 4mm and 6mm pearls also work well with this creation.

It also features the use of a chain and S-clasp to allow the necklace to be worn as at different lengths for different occasions or even different people and have a correct fit. The cone is used to hide crimps and give a finished look to the ends if the strands


  1. Approx. 264” of pearls (5mm but 4mm to 6mm also work)
  2. Soft touch, fine (.014 diameter)
  3. 7” gold chain
  4. ‘S’ clasp
  5. 22 ga. gold wire
  6. 24 gold crimps
  7. 2 split rings
  8. 2 cones
  9. Size 11 seed beads (approx. 150 beads)

Strand Lengths:

  1. 15 ½”
  2. 17 ½”
  3. 18 ½”
  4. 20”
  5. 21 ½”
  6. 22 ½”
  7. 23”
  8. 23 ½”
  9. 24”
  10. 25 ½”
  11. 25 ½”
  12. 26 ½”


  1. Start by cutting wire 4 inches longer than you want your strands, (2 inches for crimping on both sides)
  2. String pearls on the wire to the desired length, plus 3 seed beads on each end
  3. Separate strands into 3 groups of 4, shortest-med-longest, set aside
  4. With the 22 ga. gold wires, make a perfect loop (not too small), and instead of doing 3 or 4 coils to close the loop- stop after you go halfway around. The piece, (loop and tail), should measure about 4 inches.
  5. Make 6 loops that size.
  6. Crimp one side of the 4 shortest strands to one loop, and the other side to another loop.
  7. Then crimp the 4 medium strands to a loop of their own, and then the 4 longest to another.
  8. Pull the tails of the loops through a cone and the other sides through a matching cone.
  9. Pull tightly, and then complete a 3 coil perfect loop with all three wires, at the same time.
  10. Attach a split ring to 3 ½” of chain and then attach the split ring to the three-wire perfect loop you just created
  11. Repeat step 10 to the other side of the necklace
  12. Attach a jump ring about halfway down the chain on both sides, then put your ‘S’ clasp on the jump ring. This allows the necklace to vary in length to fit multiple people and multiple outfits. Leave both sides of the 'S' clasp open so that it can be moved on either side

For the dangles:

  1. String daisies and pearls in the order of your choice, on a gold headpins
  2. Complete a perfect loop to the end of the chain.




Jewelry Making  Retreats

We are also hosting private Retreat's for Getaways and Special Groups!



 Take a Class in: Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida| Georgia | Hawaii | Idaho| Illinois | Indiana | Iowa | Kansas | Kentucky| Louisiana| Maine| Maryland| Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New_Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | South_Carolina | Rhode Island | South Dakota | Tennessee| Texas | Vermont | Utah | Vermont | Virginia | Washington | West_Virginia | Wisconsin | Wyoming | Other Places |

People are saying

This was the greatest class and instructor EVER!
I went into this class thinking it would be very tedious, something fun to try, probably make something cool, but not anything I would try again. My main objective was to learn about soldering without having to invest money in tools/materials I might never use again.
Dave is a great teacher. The class was nonstop education. It was a lot of info on selling, techniques, tips, etc. Never did I feel rushed or bogged down. Dave took a great amount of time individually helping each of us. Answering even unrelated questions. He showed us ways to make silver smiting fast (big fan) and profitable.
I completed 2 projects, and felt confident enough to help a couple other students a bit. I am in awe of my projects, and although they are not my usual aesthetic, I love them, and will now set up a space to do more pieces, combining the techniques I learned with some enameling techniques.
I can't rave about Dave enough. He is so organized, calm, patient and funny. He is safety conscious and critiques your work by teaching you what you could do better. He makes you feel confident in what you are doing.
If you get the chance, take his class. I can't wait for the advanced ones.

Class review by Miranda Ackerley:

This is the perfect class for anyone wanting to learn how to be a successful silversmith, whether for yourself or your business. I’ve taken a silversmithing class before, but was unable to continue making silversmithing pieces because of how expensive the supplies were. Therefore, I was most impressed by how affordable the tools and supplies used in this silversmithing class were. Unlike other silversmithing classes, Dave taught me how to use supplies that are less expensive and don’t require their own room to keep from burning my house down. After the class, I was able to purchase the supplies and set up an area on my kitchen table to work without spending a small fortune. I think Dave can make any unsure beginner feel like an expert, and I left with the confidence to make beautiful pendants on my own.

Class Review By Alexis Brown

Just a note to thank you again for the great Intro to Silversmithing class. I learned so much in the 2 short days... and you gave me such a renewed appreciation for Southwestern jewelry.  I have a large collection of Native American jewelry that I have collected for many years... just looking at those pieces now, and realizing what is involved to create these pieces... well, I'm in awe!.

Karen V

Dave Smith’s Beginning Silversmithing class was AWESOME! Two days of nonstop education. Dave is very organized, patient and entertaining. He took time to help each person individually while keeping the rest of the class working too. He is safety conscious and critiques your work by teaching you what you could do better while instilling confidence in what you are doing. I am quite impressed with my project pieces and can't wait for the advanced class. I have been making and selling beaded jewelry for about 4 years and while I love the creative aspect, I haven’t really found my ‘nitch’. Until now! Thanks Dave,

Laury H

Hi Dave, I just wanted to thank you again for the Silversmithing class you taught at Beadoholique in Spring, Texas. I had a great time and FINALLY learned to solder without being scared of it. I am quite happy with my piece and enjoyed your way of teaching. I too teach jewelry classes and I'm a fine silver snob!! There's nothing like it although I am told gold is wonderful to work with but too rich for my 'not very deep' pockets! Thanks again and I hope to be in another one of your classes somewhere in time.

 Kathy C.

I have been wanting to attend a silversmithing class to learn about the techniques because I didn't want to learn on my own, and I am so glad I waited! I was blown away with the quality of instruction and how many techniques we were able to learn in just two days. Everything we needed was provided for the class, and I was so impressed with the preparation that is taken to get ready for students. Dave was great with giving 1 on 1 attention to each student (even in a large class), was extremely patient for those that were slower learners, and made difficult techniques seem simple with giving professional hints and tips. Plus he even pushed through and continued the course when he was sick. Dave gave us lots of options to get everything we needed to start on our own, including tools, materials, and instructional dvd's/'online content at very competitive prices as well. I was so impressed with my own work and enjoyed it so much that I decided to purchase a kit and the online instruction so I could review our techniques and learn new ones. The online content is fabulous; it gives you a view that would just be like your own on the bench, and even shows how to prevent or fix mistakes! Dave gave me the confidence to start making pieces the very next day on my own, and I'm very excited to have learned this skill. I couldn't have been happier with the class and the instructor. If you decide to take this course I guarantee you will not be disappointed!


Melissa M.

Hi Dave, I was in your class at Argenta Bead Company this past September. After your class I took another beginner silversmith class because a pendant, ring and possibly a bracelet was to be taught and I wanted more practice and knew I'd probably get to learn different techniques with silversmithing. So far the class has only worked on a ring. I am very thankful I found your class because this class is more of a craft class. I got to experience an acetylene torch, saw, warm pickle and paste flux (I prefer your method for flux & pickle) but it has been very frustrating and illogical with some procedures. Many students have had to re-solder pieces because the instructor did not do a good job at showing how to manipulate the solder with heat. Because you made us watch twice how solder follows heat I was able to save my solder when it balled up on the inside of my ring connection. Very proud moment for me because I was in a state of panic. There is much more I can point out but it would be a book. If I hadn't found your class and took just this other one I would have given up on making jewelry, and I want this to be a business. So thank you for sharing your skills and experience. I hope to take another class from you some day.


Rick C.

This was so much more than a soldering class. I went home and created jewelry for my wife and kids. They love it!

Tiffany H.

OMG! I am so looking forward to the advanced silversmithing class. I am the only student at my school who is making their own sterling body art.


 Amber T.

I tried learning in on-line silversmithing classes but there just wasn't enough detail about how to solder a bezel or how to handle the problems I was having. Dave covered all that in class. My comfort level is enough now that I plan to start selling as soon as I get enough pieces created. 

TAGS:Classic Pearl Necklace,jewelry making supplies ,How to Beading Projects, Wire Working, Bead Weaving, Beads, Sterling Silver, Swarovski, PMC, Precious Metal Clay, Silversmithing supplies, bead store sipplies, gemstone beads, silversmithing classes, silversmithing retreats, ring class, bracelet, class, earring class, Jewelry tools, soldering, hammering, stamping,polishing of Jewelry Take a Class in: Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida| Georgia, Hawaii, Idaho| Illinois, Indiana, Iowa, Kansas, Kentucky| Louisiana| Maine| Maryland| Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New_Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, South_Carolina, Rhode Island, South Dakota, Tennessee| Texas, Vermont, Utah, Vermont, Virginia, Washington, West_Virginia, Wisconsin, Wyoming, Other Places,