SilversmithingClass.com
 "Where our mission is your success"
317 755-0095
70214 Lakewood RD
North Bend, OR 97459
;

 

Dual Split Band Ring Class

Dual Split Band Ring with V shaped attaching point


The challenge of the dual band ring is a clean solder joint where he ring shank meets the cabochon base.  A clean solder joint means less to no polishing in a hard to reach area. In this class you will learn how to use a jewelers saw, ring bending pliers, ring mandrel, ring gauge,  ring clamp, ring mandrel, tumble polisher and more.

You will be expected to have some soldering ability and experience with making and using a bezel.  I enthusiastically recommend that you bring a bezel cup or bezel plate and stone that you would like to mount. A stone and bezel or bezel plate that demonstrates your unique style. If you can't bring a stone and bezel plate bezel cup then I have about 20 different cabochons with bezel cups that are 13x18 mm. The Turquoise in the picture below is a 13x18 mm.  My recommendation is for a stone and cup or bezel plate that would be smaller than the Jasper pictured below, but this is a free form so bring several if you have them of sizes that you like. 
Since some of my students soldering ability is a little rusty I will give a one hour demo on safety and bezel making and embellishment review.  Within two hours you will be creating your ring. We expect that you can make at least one ring in class.

Ring  making skills you will learn in this class:
  how to form a ring shank using ring bending pliers
  use of a jewelers saw & how to pick a blade size
  proper technique for using a burnishing tool
  work hardening a ring
  using a ring clamp and ring mandrel to assist polishing
  a technique to get proper alignment of ring band to top
  a method for quick polishing the inside of a ring band
  a method for no solder cleanup where ring band touches top
  how to place embellishments in front of mounted cabochons
  to develop rapid product fabrication skills
  to create a hammered surface on silver
  use of a tumble polisher with steel shot
Materials that are used and available in the class are:
  bezel cup or bezel plate with cabochon
  cast sterling embellishments (optional)
  pattern wire (optional)
  twisted wire (optional)
  solder and expendables (included in materials costs)
  cabochons
  dual half round sterling wire  (included in materials costs)
Ring making skills  you will learn in this class:
  use of ring bending pliers
  to create a hammered surface on silver
  proper technique for using a burnishing tool
  to create identifying marks on your metal projects
  using a ring holder to assist polishing
  rapid product development skills
You will also receive:
  a link to the documentation website of my beginning silversmithing class that includes a slideshow of soldering process and an e-Book of jewelry selling techniques; and links to shows and expos to sell your jewelry.
  More...

Cost:: $165.00 (plus materials fee on class day of $15.00 to $65.00 depending on the designs you choose) 6 hours on the same day, max students: 8

Your Instructor:

David Smith, a metal worker with over 35 years experience, has been selling jewelry and providing jewelry creation instruction for the past 12 years. David is also a member of the Society of American Silversmiths.

" Come join us for a day of fun and creativity"  David Smith

Here are links to my jewelry classes in the United States.

 Take a Class in: Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida| Georgia | Hawaii |Idaho| Illinois | Indiana | Iowa | Kansas | Kentucky| Louisiana| Maine| Maryland| Massachusetts | Michigan | Minnesota | Mississippi | Missouri| Montana | Nebraska | Nevada | New Hampshire | New Jersey | New_Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | South Dakota | Tennessee| Texas | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming | Other Places |

 

Other questions: please contact David Smith by email at
Dave@SilverSmithingClass.com or give me a call at 317 755-0095

Top

Tags: Sterling Silver wave bracelet, silversmithing, American Indian jewelry, Silversmithing Classes, Beginning Class, Fine Silver soldering silver smithing , Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, California, Hawaii, Honolulu, Texas, Arkansas, Oklahoma, Florida, Alabama, Class , taught, David Lee Smith silversmith

Terms of Service | Privacy Policy | Refund Policy

Our customers' thoughts
 about our classes:

This was the greatest class and instructor EVER!
I went into this class thinking it would be very tedious, something fun to try, probably make something cool, but not anything I would try again. My main objective was to learn about soldering without having to invest money in tools/materials I might never use again.
Dave is a great teacher. The class was nonstop education. It was a lot of info on selling, techniques, tips, etc. Never did I feel rushed or bogged down. Dave took a great amount of time individually helping each of us. Answering even unrelated questions. He showed us ways to make silver smiting fast (big fan) and profitable.
I completed 2 projects, and felt confident enough to help a couple other students a bit. I am in awe of my projects, and although they are not my usual aesthetic, I love them, and will now set up a space to do more pieces, combining the techniques I learned with some enameling techniques.
I can't rave about Dave enough. He is so organized, calm, patient and funny. He is safety conscious and critiques your work by teaching you what you could do better. He makes you feel confident in what you are doing.
If you get the chance, take his class. I can't wait for the advanced ones.

Class review by Miranda Ackerley:


This is the perfect class for anyone wanting to learn how to be a successful silversmith, whether for yourself or your business. Iíve taken a silversmithing class before, but was unable to continue making silversmithing pieces because of how expensive the supplies were. Therefore, I was most impressed by how affordable the tools and supplies used in this silversmithing class were. Unlike other silversmithing classes, Dave taught me how to use supplies that are less expensive and donít require their own room to keep from burning my house down. After the class, I was able to purchase the supplies and set up an area on my kitchen table to work without spending a small fortune. I think Dave can make any unsure beginner feel like an expert, and I left with the confidence to make beautiful pendants on my own.


Class Review By Alexis Brown
 

Just a note to thank you again for the great Intro to Silversmithing class. I learned so much in the 2 short days... and you gave me such a renewed appreciation for Southwestern jewelry.  I have a large collection of Native American jewelry that I have collected for many years... just looking at those pieces now, and realizing what is involved to create these pieces... well, I'm in awe!.

Karen V
 

Dave Smithís Beginning Silversmithing class was AWESOME! Two days of nonstop education. Dave is very organized, patient and entertaining. He took time to help each person individually while keeping the rest of the class working too. He is safety conscious and critiques your work by teaching you what you could do better while instilling confidence in what you are doing. I am quite impressed with my project pieces and can't wait for the advanced class. I have been making and selling beaded jewelry for about 4 years and while I love the creative aspect, I havenít really found my Ďnitchí. Until now! Thanks Dave,

Laury H
 

Hi Dave, I just wanted to thank you again for the Silversmithing class you taught at Beadoholique in Spring, Texas. I had a great time and FINALLY learned to solder without being scared of it. I am quite happy with my piece and enjoyed your way of teaching. I too teach jewelry classes and I'm a fine silver snob!! There's nothing like it although I am told gold is wonderful to work with but too rich for my 'not very deep' pockets! Thanks again and I hope to be in another one of your classes somewhere in time.

 Kathy C.
 

I have been wanting to attend a silversmithing class to learn about the techniques because I didn't want to learn on my own, and I am so glad I waited! I was blown away with the quality of instruction and how many techniques we were able to learn in just two days. Everything we needed was provided for the class, and I was so impressed with the preparation that is taken to get ready for students. Dave was great with giving 1 on 1 attention to each student (even in a large class), was extremely patient for those that were slower learners, and made difficult techniques seem simple with giving professional hints and tips. Plus he even pushed through and continued the course when he was sick. Dave gave us lots of options to get everything we needed to start on our own, including tools, materials, and instructional dvd's/'online content at very competitive prices as well. I was so impressed with my own work and enjoyed it so much that I decided to purchase a kit and the online instruction so I could review our techniques and learn new ones. The online content is fabulous; it gives you a view that would just be like your own on the bench, and even shows how to prevent or fix mistakes! Dave gave me the confidence to start making pieces the very next day on my own, and I'm very excited to have learned this skill. I couldn't have been happier with the class and the instructor. If you decide to take this course I guarantee you will not be disappointed!

 

Melissa M.

Hi Dave, I was in your class at Argenta Bead Company this past September. After your class I took another beginner silversmith class because a pendant, ring and possibly a bracelet was to be taught and I wanted more practice and knew I'd probably get to learn different techniques with silversmithing. So far the class has only worked on a ring. I am very thankful I found your class because this class is more of a craft class. I got to experience an acetylene torch, saw, warm pickle and paste flux (I prefer your method for flux & pickle) but it has been very frustrating and illogical with some procedures. Many students have had to re-solder pieces because the instructor did not do a good job at showing how to manipulate the solder with heat. Because you made us watch twice how solder follows heat I was able to save my solder when it balled up on the inside of my ring connection. Very proud moment for me because I was in a state of panic. There is much more I can point out but it would be a book. If I hadn't found your class and took just this other one I would have given up on making jewelry, and I want this to be a business. So thank you for sharing your skills and experience. I hope to take another class from you some day.

 

Rick C.

This was so much more than a soldering class. I went home and created jewelry for my wife and kids. They love it!


Tiffany H.

OMG! I am so looking forward to the advanced silversmithing class. I am the only student at my school who is making their own sterling body art.


 

 Amber T.

I tried learning in on-line silversmithing classes but there just wasn't enough detail about how to solder a bezel or how to handle the problems I was having. Dave covered all that in class. My comfort level is enough now that I plan to start selling as soon as I get enough pieces created.