5 Function Multi Tool for Jewelry makers

Alright, this is my new business card that has a whole bunch of neat functions to it. Of course there's a millimeter ruler at the bottom, but there's also some gauges for showing what kind of, uh, thickness your plates are. Now when you put 'em in, you don't put 'em in here because that's not accurate. You slide 'em in through the corner here. The reason that is, is 'cause the 3D printer, uh, has a tendency to mangle those ends when it changes directions. So you can tell what gauge your wire is. In addition to that, we have a, uh, in addition to that, we have a way to make sure you cut your bezel square. So you lay your bezel against this line here and hold it good and tight. Flip it over like so, make sure it stays tight in there. And then you take this shear and you put it this edge right on the face here on this edge. And you slide it until you get the bezel. In the crook where the shear joins together. You wanna make sure you slip that right in there so that you get a nice clean cut, Clean cut with no bending over and a and then you have a 90 degree angle. The function that I'm gonna show you next is to trace the outside of this bezel, a equal distance all the way around, but with a pretty smooth line. There is a groove right here that this bezel is gonna slide into, just like that. Then I'm gonna hold the card down lightly with my hand and put my pin in. And I'm gonna pick a distance that I want. I'm gonna do, uh, right here for, for this one here. And so what I'll do is I'll hold that down and I'll keep this engaged very carefully. And if I do this right, it's this technique, I should end up with a really nice line to cut to on my bezel without having to fight it a whole lot. And everything will still be uniform and symmetrical to the bezel. And there we go. So that's how you can cut that line just perfect around that bezel. So that's my card. Thanks a bunch. Hope you can get a lot of use out of it. Take care.

Transcript provided for accessibility and search indexing.